Original price was: ₨25,000.00.₨18,000.00Current price is: ₨18,000.00.
| Flexural modulus： | 1.701 MPa (±5%) |
| Flexural strength ： | 56.8 MPa (±5%) |
| Tensile strength： | 38.5 MPa (±5%) |
| Tensile modulus： | 620.4 MPa (±5%) |
| Elongation at yield point %： | 3.1 (±5%) |
| Shore Hardness： | 80-88 D |
| Elongation to break %： | 6.5 (±5%) |
| Density： | 1.07-1.27 g/cm3 |
| Notched impact strength: | 60-75 J/m |
| Viscosity： | 270-410 MPa·S |
| Max Pulling Force | 1609 N (±5%) |
| Max Force for Deformation | 3.8 mm (±5%) |
| 3D printer | Bottom exposure time | Layer exposure time |
| LCD RGB screen | 50-70s | 10-14s |
| LCD monochrome | 25-40s | 2.5-4s |
| DLP Printer | 15-30s | 2-4s |
Step 1, keep the prints on the platform, and wipe away the resin on the platform with tissue.
Step 2, Spray the water on the prints and blow it with cool air.
Step 3, Repeat it until it is clean.
| Brand | Orthodontic |
|---|---|
| Colours | Grey, Skin |
